• Series : High power mass notification system
    名稱 : MTC-1200大功率擴音警報器
    name : HPS-8004 High Power Mass Notification Siren
    Click : 78795

    HPS-8004 high power mass notification siren are applied for mass alerting and notification operation,such as in petrochemical,mining,power station,dam,natural hazard warning,military base,prison,campus and other industrial and civil fields.
     
    The siren has advantages of high acoustic output power,massive sound coverage and shock voice performance.The very high power horn is able to achieve max. 1300 meters and max. 137dB sound pressure.The horn is with high shock strength,and able to work under severe environments,anti water,dust(IP66),corrosion,and high-low temperature resistant.
     
    Ten general alarm tones(or other special tones) are integrated,Siren,Fire,Security,First Aid,Emergency,Warning,Air Horn Pi-Pi-Pi,Pi---,All Clear,which carry out alarm tasks under different emergency situation.
     
    One push-to-talk microphone provided PA solution,also can record instant PA and replay repeatedly.With USB Sticker / SD-Card port player,it can play mp3.It also provides Audio input and output port for connect other equipment.
     
    This product has been authorized by CE test system with No. EC.1282.0S130823.WME2124
     

     
     

     
    Specification:
    Control Amplifier
    Model
    HPS-8004
    Input Voltage
    AC220V,50-60Hz
    Rated Power
    1200W
    Max Power
    1800W
    Max Horn Amount
    4 Units
    Output Impedance
    Alarm Tone
    1.Siren  2.Fire  3.Security  4.First Aid  5.Emergency
      6.Warning  7.Air Horn  8.Pi-Pi-Pi  9.Pi---  10.All Clear
    Line In/Out
    Mic In×2,Aux In×2,Line Out×1,
    USB×1,SD×1,Microphone (Record&Play)×1
    Remote Control
    Contact On/Off Signal Port
    Frequency Response
    15Hz-16KHz
    S/N Ratio
    MIC 65dB,AUX 85dB
    Installation
    Standard Cabinet
    Product Dimension
    484×136×330mm
    Package Dimension
    530×220×450mm
    Net Weight
    9.2Kg
    Gross Weight
    11.6Kg
    Material
    Aluminium Alloy / Iron
    High Power Horn
    Model
    STORM-7300
    Horn Amount
    (same direction)
    1 Unit
    2 Units
    4 Units
    8 Units
    Max. Sound Pressure (@1m)
    137dB
    140dB
    143dB
    146dB
    Effective Sound Range / Area
    Alarm 1.3km
    1.77 sq.km
    PA Audio 0.8Km
    0.67 sq.km
    Alarm 1.8km
    3.4 sq.km
    PA Audio 1.1km
    1.27 sq.km
    Alarm 2.3km
    5.5 sq.km
    PA Audio 1.4 km
    2 sq.km
    Alarm 3km
    9.42 sq.km
    PA Audio 2km
    4.19 sq.km
    Max/Rated Power
    450W / 300W
    Impedance
    Frequency Response
    300-8kHz
    Material
    BMC Synthetic Resin/ABS
    Operation Temperature
    -50℃~+55℃
    Protection Grade
    IP66
    Product Dimension
    596×510×265mm
    Package Dimension
    630×375×260mm
    Net Weight
    9.5Kg
    Gross Weight
    11Kg
     
     
    Horn Installation:
    1,Pls combine the horn mouth and sound driver by flange connector with screws.Pls take care if the rubber gasket has been put in between the horn mouth and the flange connector.Fix two frames on bottom sides of sound driver by screw caps.Through frames the horn can be fixed on wall,cement ground,install base and other surface.
     
    We provide horizontal and vertical frame for selection.Below horn and frame dimension.

     
     
     
    2,By two multi-strand copper cable (or one cable contains two corns),connect horn output port behind control amplifier separately with input lines of horns.Pls avoid short circuit as two multi-strand copper cable touch each other during usage.
     
    Pls select proper thickness cable according to length demand.For reducing sound attenuation during long distance,the cable cross sectional area need enlarging with the distance increasing.The effective wire length is suggested not exceed 1000 meters.Below the suggested setting of cross sectional area with cable length.
     
    Connecting Cable Length
    (Meter)
    Cable Cross Sectional Area
    (Square Millimeter)
    Length≤50
    ≥1.0
    50<Length≤200
    ≥1.5
    200<Length≤500
    ≥2.5
    500<Length≤800
    ≥3.5
    800<Length≤1000
    ≥4.5
    Length>1000
    ≥5.0
     
    Control Amplifier Operation:

    1.Power Switch
    Turn on power switch,the indicator lighted.
     
    2.Power Input
    Port for AC220V input cable.
     
    3.Power Input Fuse
    Specification,5×20mm,10A.Spare fuse included.

    4.Volume Justify
    Justify sound volume through volume knob,sound enlarge colorwise.
     
    5.Alarm Operation
    Press once tone button to trigger alarm,press again to close it.
     
    TONE1 Siren
    TONE2 Fire
    TONE3 Security
    TONE4 First Aid
    TONE5 Emergency
    TONE6 Warning
    TONE7 Horn
    TONE8 Pi-Pi-Pi
    TONE9 Pi---
    TONE10 All Clear
     
    6.TONE On/Off Signal Input
    In case connecting other outside equipment,which is going to trigger alarm tone,such as remote push button or reply switch,we use the ‘TONE On/Off Signal Input’ port behind the control amplifier.
     
    The number 1 to 10 mean TONE 1 to TONE 10.Two signal cables connect one control location,one cable connect to concerning number,the other to ‘COM’.In case a few control location required,the number port and ‘COM’ port can be in parallel connection.Once contact signal given,alarm triggered,once again,alarm stopped.Below connection diagram.

    7.Push-to-talk Microphone
    Holding switch on side microphone side when PA talking use.
     
    8.Record And Play
    Press ‘Record’ button to record max. 20 secs voice,press again to stop recording.Press ‘Play’ button to play recorded content repeatedly,and press again to stop playing.
     
    9.USB/SD card player

    Turn ‘OFF/ON ’switch on the player board off.Press ‘MODE’ to select between USB/SD card and FM radio.Insert USB stick or SD card with mp3 files into concerning port,the player will scan and play automatically.Press ?II to play or pause. Press ??I and I?? to forward and backward files.
     
    10/11.Audio Input / Output Port
    It provides 2 MIC (6.35mm) line input,2 AUX (RCA) line input and 1 Line output(RCA),which make it easy connect different external audio equipments.
     
    12.Horn Output Terminal
    The numbers ‘I,II,III,IV,V’ mean connect terminal (each with two posts) for connect 4 high power horns separately.Each terminal connect two multi-strand copper cables to one horn.Pls avoid cables from different horns connect into different terminals.
     
    13.Horn Output Fuse
    Specification,5×20mm,5A.Spare fuse included.

    14.Horn Operation Indicator
    Delighted when concerning horn sounded.
     
    Packing list:
    HPS-8004 high power siren control amplifier ×1
    (AC220V,1200W, Standard Cabinet);
     
    STORM-7300 high power horn ×4
    (300W,include sound driver,horn mouth,frame);
     
    MA SAFETY SIGNAL Co.,Ltd.
    Add:No.23 Wenqu West Road,Wenzhou City,China.
    General Manager:Gary Wang  Tel:+86 13625777856
    E-mail: garymasafety@gmail.com
     
     
     
     
     
     
     
     
     
    Window Close 】【Home Page
    Prev :     
    Copyright©MA Safety Signal Co.,Ltd. All Rights Reserved.
    日本十八禁无遮掩视频